Industrial Axial Fan Cross-Reference & Alternative Guide
Deqing Jiefeng Electric (JIEFENGFAN) provides AC/DC/EC industrial axial fan alternatives, cross-referencing imported fan lines by frame size and operating point to help equipment OEMs shorten lead times and reduce cost. Cross-reference directions below; final selection is confirmed by samples and operating-point testing.
Alternative Cross-Reference Series
| Topic | Typical use | Jiefeng model |
|---|---|---|
| 12038 AC axial fan | Control cabinets, direct AC supply | JF12038A2HBL/T-5 |
| 12038 DC24V axial fan | 24V systems, PWM/FG/RD signals | JF12038D24HBL-5 |
| 17251 high-static-pressure fan | High heat load, high airflow | JF17251A2HBL/T-5 |
| 8025 / 8038 small axial fans | Compact power supplies, instruments | JF8025 / JF8038 |
| AC220V axial fan series | Direct AC-powered industrial equipment | AC series |
| EC electronically commutated fan | Energy-saving, speed-adjustable | JF12038EHBL-5 |
| Enclosure filter fan | Dust-proof cabinet ventilation | JW filter fan series |
Frequently Asked Questions (FAQ)
What domestic alternatives are available for industrial axial fans?
JIEFENGFAN offers AC/DC/EC axial fans, centrifugal fans and cabinet filter fans that can be selected by dimensions, voltage, airflow and static pressure as alternatives to imported industrial axial fans.
Which imported fan brands can Jiefeng cross-reference?
Jiefeng products can be cross-referenced by size and parameters against common industrial axial fan lines from ebm-papst, Delta, Sanyo Denki and Sunon. Final selection is confirmed by operating point and samples.
Can a domestic alternative directly replace an imported fan?
Fans with similar frame and mounting dimensions are replacement candidates, but voltage, airflow, static pressure, speed, noise, wiring and speed signals must be checked before replacement.
What information is needed for a domestic alternative selection?
Provide mounting dimensions, rated voltage, target airflow or heat load, system resistance, noise requirements and whether PWM/FG/RD functions are needed.