The 12038 class refers to roughly 120×120×38mm AC axial fans, one of the most common sizes for control cabinet, power supply and automation equipment cooling. The Jiefeng JF12038A2HBL/T-5 is an alternative candidate for imported 12038-size AC axial fans.
Jiefeng JF12038A2HBL/T-5 Specifications
| Item | Spec |
|---|---|
| Dimensions | 120.3 × 120.3 × 38.5 mm |
| Mounting hole spacing | 105.0 × 105.0 mm |
| Rated voltage | 110V / 220V / 380V |
| Power | 22.0 / 30.4 W |
| Airflow | approx. 89 / 95 CFM |
| Static pressure | approx. 0.25 / 0.30 inch-H₂O |
| Speed | approx. 2550 / 3100 RPM |
| Noise | approx. 40 / 48 dBA |
| Ingress protection | IP43 |
| Operating temperature | -30°C to +70°C |
Notes for Cross-Reference
Similar dimensions do not mean a direct drop-in replacement. Confirm rated voltage and frequency (50/60Hz), required airflow and static pressure against filter and heat-sink resistance, noise limits, wiring, and any speed signals. Provide your equipment conditions and request a sample for testing.
Frequently Asked Questions (FAQ)
What are the domestic alternatives for 12038 AC axial fans?
The Jiefeng JF12038A2HBL/T-5 is a 120×120×38.5mm AC axial fan supporting 110V/220V/380V, available as an alternative to imported 12038-size AC axial fans.
What parameters must be checked when replacing an imported 12038 fan?
Check frame size 120.3×120.3×38.5mm, mounting hole spacing 105×105mm, rated voltage, airflow, static pressure, speed, noise and wiring.
What are the airflow and static pressure of the Jiefeng 12038?
JF12038A2HBL/T-5 delivers about 89/95 CFM airflow, about 0.25/0.30 inch-H₂O static pressure, about 2550/3100 RPM and about 40/48 dBA. Refer to the datasheet for the selected voltage.
Can a 12038 fan directly replace an ebm-papst fan of the same size?
Similar frame and mounting dimensions make it a candidate, but speed, airflow/static-pressure curve and wiring may differ. Provide your equipment conditions and test a sample first.