12038 AC Axial Fan Domestic Replacement Guide
12038 refers to the ~120×120×38mm AC axial fan size, one of the most common sizes for industrial control cabinets, power supplies, and automation equipment. JIEFENGFAN JF12038A2HBL/T-5 serves as a domestic replacement candidate for imported AC fans in this size. See AC axial fan product list.
JF12038A2HBL/T-5 Key Parameters
| Item | Specification |
|---|---|
| Dimensions | 120.3 × 120.3 × 38.5 mm |
| Mounting hole spacing | 105.0 × 105.0 mm |
| Rated voltage | 110V / 220V / 380V |
| Power | 22.0 / 30.4 W |
| Airflow | approx. 89 / 95 CFM |
| Static pressure | approx. 0.25 / 0.30 inch-H₂O |
| Speed | approx. 2550 / 3100 RPM |
| Noise | approx. 40 / 48 dBA |
| Protection rating | IP43 |
| Operating temperature | -30℃ ~ +70℃ |
Replacement Selection Notes
Similar dimensions do not mean direct replacement. Confirm: rated voltage and frequency (50/60Hz), actual airflow and static pressure needed (accounting for filter and heat sink resistance), noise requirements, wiring method, and whether tachometer signal is needed. Provide operating conditions and request samples for testing first.
For further selection, prepare mounting dimensions, voltage, target airflow/static pressure, operating environment, continuous operation requirements, and control function needs, then compare against product parameters, or contact us for selection support.
Frequently Asked Questions (FAQ)
What domestic replacement models are available for 12038 AC axial fans?
JIEFENGFAN JF12038A2HBL/T-5 is a 120×120×38.5mm AC axial fan supporting 110V/220V/380V, serving as a domestic replacement candidate for imported 12038-size AC fans.
What parameters should I check when replacing an imported 12038 fan?
Check overall dimensions 120.3×120.3×38.5mm, mounting hole spacing 105×105mm, rated voltage, airflow, static pressure, speed, noise, and wiring.
What is the airflow and static pressure of JIEFENGFAN 12038?
JF12038A2HBL/T-5 airflow is about 89/95 CFM, static pressure about 0.25/0.30 inch-H₂O, speed about 2550/3100 RPM, noise about 40/48 dBA. Refer to the specific voltage spec sheet for exact values.
Can I directly replace an ebm-papst same-size 12038 fan?
Similar outer and mounting dimensions make it a candidate replacement, but speed, airflow-pressure curve, and wiring may differ. Provide operating conditions and obtain samples for confirmation first.